Name: iLinks Agg

Text: iLink Agg
(16) 10/100/1000/Gig Network Ports to
(8) 10/100/1000/Gig Monitor Ports
Fully Configurable Port Mapping
With 24 ports in a 1U form-factor, Net Optics iLink Agg is the industry’s highest port density
1 Gigabit link aggregator designed for monitoring applications. It enables a pool of
monitoring tools to be applied to as many as 8 network links (using integrated in-line Taps)
or 16 Span ports, with fully configurable port mapping. Aggregate traffic from some ports.
Regenerate monitor streams to multiple ports. Switch links to tools in a 1-to-1 mapping. The
Link Agg supports any configuration—monitor ports can also be used as additional network
ports, and Span network ports can be used as additional monitor ports. You can even split a
cable and use the RX fiber for a network connection and the TX fiber for a monitor
connection, increasing the potential number of ports to 24 network plus 24 monitor.
The iLink Agg Span model has 24 SFP ports that enable mixing fiber and copper
transceivers to match any links, Span ports, and tools. In-line models are available
supporting singlemode and multimode fiber as well as copper media on the network side,
and SFP ports to support any interface on monitoring tools. When required, data rate
conversion between network ports and monitor ports is automatic.
Manage the iLink Agg locally or remotely. Management features include simple port
mapping, SSH security, role-based access, RADIUS and TACACS+ authentication and
authorization, RMON traffic statistics, and remote software upgrades.

Technical Specifications:
Operating:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical:
Dimensions: 1.75” high x 19” wide x 23.5” deep (24” slide)
Weight: 8.2 lbs (3.7 kg)
Hot-Swappable Redundant Power Supplies:

AC Input: 100-240V, 0.7A, 47-63Hz
DC Input: -48VDC nominal, -36 to -72VDC, 1.8A

Cable Interface:
Fiber Cable Type: Depends on SFP modules

Connectors:
Monitoring Port: (8) SFP slots
Network Ports: (16) SFP slots, (16) RJ45, (16) LC fiber

(depending on model)
Management Ports: (1) RJ45 RS232 and (1) RJ45 10/100/1000

Performance:

All of the integrated copper and fiber Taps in the iLink Agg in-line models are fully passive,
keeping traffic flowing even when the device is not powered. For additional reliability, the
iLink Agg features hot-swappable redundant power supplies.

No packets are dropped when the aggregated traffic to any monitor
port does not exceed the monitor port bandwidth

Passive, Secure Technology

CLI local or SSH remote, RADIUS, TACACS+, RMON

• Increases monitoring efficiency by enabling tools to view the traffic on as many as eight
network links (inline models) or 16 Span ports or external Taps (Span model) simultaneously
• Eliminates resource contention by enabling as many as eight devices to monitor identical
traffic at the same time
• Improves monitoring flexibility with fully configurable port mappings (any number of
links to any number of tools)
• Provides complete visibility at 1 Gbps without interfering with the data stream and
without introducing a point of failure
• Supports media type conversion with SFP transceiver modules on the monitor ports (all
models) and the network ports (Span model only)
• Enhances monitoring security because no IP address is needed

Ease of Use







Pre-loaded with common port mapping configurations
LEDs indicate Link, Activity, and Power status
Front-mounted connectors ease installation and operation
High density 1U rack enclosure with slide rails
Compatible with all Net Optics Taps and Bypass Switches
Compatible with all major manufacturers' monitoring devices, including protocol
analyzers, probes, firewalls, and intrusion detection/prevention systems

Management:
Certifications:
Safety: UL, CE EMC: FCC, VCCI, C-Tick
Environmental: RoHS, WEEE, Fully IEEE 802.3 compliant
Part Number

LA-2400 *
LA-2405 *
LA-2410 *
LA-2415 *
LA-2420 *
SFPKT-SX
SFPKT-50SX
SFPKT-LX
SFPKT-GCU
SFPKT-CU3

Description

iLink Agg, 1G, 24 SFP Ports, Span
iLink Agg, (16) 10/100/1G IL to (8) SFP, Copper
iLink Agg, (16) SX IL to (8) SFP, 62.5μm, 50/50, LC
iLink Agg, (16) SX IL to (8) SFP, 50μm, 50/50, LC
iLink Agg, (16) LX IL to (8) SFP, 8.5μm, 50/50, LC
GigaBit Fiber SX SFP with cable
GigaBit Fiber SX SFP with cable 50μm
GigaBit Fiber LX SFP with cable
GigaBit Copper SFP with cable
10/100/1000 Copper SFP with cable

All products include a 1 year manufacturer’s warranty. A service plan with
up to 7 years coverage and an advanced replacement option is available.
* Add -DC to the part number for the -48V model

ELEXO
Net Optics Inc., 5303 Betsy Ross Drive, Santa Clara, CA 95054, USA
Tel: +1 (408) 737-7777 • www.netoptics.com
Net Optics® is a registered trademark of Net Optics, Inc. Copyright 1996-2009 Net Optics, Inc. All rights
reserved. Additional company and product names may be trademarks or registered trademarks of the
individual companies and are respectfully acknowledged. 800-0130-001 PUBLA2400D Rev. 1, 10/09

20 Rue de Billancourt
92100 Boulogne-Billancourt
Téléphone : 33 (0) 1 41 22 10 00
Télécopie : 33 (0) 1 41 22 10 01
Courriel : info@elexo.fr
TVA : FR00722063534

Document Path: ["953-net-optics-brochure-ilinks-agg.pdf"]

e-Highlighter

Click to send permalink to address bar, or right-click to copy permalink.

Un-highlight all Un-highlight selectionu Highlight selectionh