Name: BaseT Tap

Text: 10/100BaseT Tap
Net Optics 10/100BaseT Taps supply mission-critical networks with superior
network visibility and security access. The breakthrough design of the Net Optics
10/100BaseT Tap ensures zero impact on network traffic while maintaining
uninterrupted access for monitoring and security devices. These are the world’s first
and only 10/100BaseT Taps offering “zero delay” technology.
Highly sensitive network locations can improve monitoring performance via the
innovative features of Net Optics Taps. Net Optics’ pioneering design ensures that
any loss of power to the Tap is transparent to the network, and does not affect the
flow of traffic through the Tap – eliminating packet delay and loss as potential
security issues.
Without an IP address, monitoring devices are isolated from the network,
dramatically reducing their exposure to attacks. However, the monitoring device
connected to the Tap still sees all full-duplex traffic as if it were in-line, including
Layer 1 and Layer 2 errors.

Operating Specifications:

Operating Temperature: 0ºC to 55ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Redundant Power Supplies:

Input: 100-240VAC, 0.5A, 47-63Hz
Output: 12V 1.5A
Dimensions: 1.25” high x 4.2” deep x 4.5” wide

Cable Interface:
Copper Cable Type:

For extra uptime protection, Net Optics 10/100BaseT Taps offer redundant power
connections. All network and monitoring cables necessary for plug-and-play
deployment are included.

22-24 AWG unshielded twisted pair cable, CAT5/CAT5E
Link Distance Supported: 100 meters

Passive, Secure Technology

Monitoring Ports: (2) RJ45, 8 pin connectors

• Provides passive access at 10 or 100 Mbps without data stream interference or
introducing a point of failure
• Unique Zero DelayTM technology ensures no packet delay or loss if power is lost
to the Tap
• Passes all full-duplex traffic (including errors) from all layers for comprehensive
troubleshooting
• No IP address is needed for the Tap or monitoring device, enhancing monitoring
security
• Redundant power ensures monitoring uptime
• Enables auto-negotiation, or fixed speed and duplexing settings

Ease of Use






Front-mounted connectors support easy installation and operation
LED indicators show redundant power status
Silk-screened application diagram illustrates all connections for easy deployment
Optional 19-inch rack frames hold up to 3 or 12 Taps
Compatible with all major manufacturers’ monitoring devices, including protocol
analyzers, probes, and intrusion detection/prevention systems

Connectors:

Network Ports: (2) RJ45, 8 pin connectors

Certifications:

Fully RoHS compliant
Fully IEEE 802.3 compliant
Part Number

Description

TP-CU
RK-12
RK-3

10/100BaseT Tap
Twelve Slot Rack Mount Frame
Three Slot Rack Mount Frame

All products include a 1 year manufacturer’s warranty. An additional 1
or 2 year extended warranty may also be purchased.

ELEXO
20 Rue de Billancourt
92100 Boulogne-Billancourt
Téléphone : 33 (0) 1 41 22 10 00
Télécopie : 33 (0) 1 41 22 10 01
Courriel : [email protected]
TVA : FR00722063534

1130 Mountain View-Alviso Road • Sunnyvale, CA 94089
Tel: +1 (408) 737-7777 • www.netoptics.com

Zero Delay TM and Net Optics® are trademarks or registered trademarks of Net Optics, Inc. Copyright 1996-2006
Net Optics, Inc. All rights reserved. Additional company and product names may be trademarks or registered
trademarks of the individual companies and are respectfully acknowledged.
PUBTPCUD Rev. 1, 06/06

Document Path: ["966-net-optics-brochure-baset-tap.pdf"]

e-Highlighter

Click to send permalink to address bar, or right-click to copy permalink.

Un-highlight all Un-highlight selectionu Highlight selectionh