Name: MPM-1000

Text: Ruggedized MPM-1000 IP Modem
Provides Military and Commercial Customers with the
Specialized IP SATCOM Necessary to Keep Highly Mobile,
Dispersed and Remote Users Connected
Linkabit’s Ruggedized MPM-1000 Modem IP (RMPM) with its Network Centric
Waveform (NCW) reduces operational cost and supports the highest number of
IP users by providing very efficient use of Satellite Bandwidth over any
Military or Commercial transponded satellite. The RMPM is a conduction
cooled unit that is environmentally sealed for optimal use in harsh environments. It has been tested and certified to meet all the requirements of the tactical
environment. The RMPM is fully automated and once properly configured,
requires no operator intervention if link conditions change, or if a different
type terminal joins the network. It has been designed to utilize and optimize the
full capabilities of the Wideband Global SATCOM (WGS) multi-beam, multiband satellite.
The NCW is the U.S. Army’s Open Standard (Non-Proprietary) Waveform that
provides optimal performance in any SATCOM architecture with any size
aperture terminal. It provides a fully certified secure network that is self forming
and self healing making it very easy to use and maintain. Satellite resources can
be managed on the battlefield or remote area with no special hub hardware
required. Any large aperture terminal can operate as the Network Controller
and there are allowances for automatic or planned Network Control handover.
With its rapid acquisition/reacquisition, hub assist functions and Doppler
compensation, it provides outstanding support for COTM communications.

• E FFICIENT U SE OF S ATELLITE
R ESOURCES
– A DVANCED MF-TDMA, DAMA
S CHEDULER
– A DAPTIVE C ODING AND
M ODULATION
– D IRECT S EQUENCE S PREADING
ON A B URST- BY-B URST B ASIS
– S UPPORTS M ESH , H UB -S POKE
AND H YBRID N ETWORKS
– S UPPORTS N ON -C ONTIGUOUS
B ANDWIDTHS IN M ULTIPLE
T RANSPONDERS
• M EETS TACTICAL E NVIRONMENT
– D ESIGNED TO M EET MIL-STD-810F
AND MIL-STD-461
• M AXIMUM T HROUGHPUT WITH A NY
S IZE T ERMINAL IN A S INGLE N ETWORK
– R ESPONSIVE L INK P OWER AND
DATA R ATE C ONTROL
– W IDE R ANGE OF DATA R ATES ,
M ODULATIONS AND FEC C ODE R ATES
– S IMULTANEOUS S UPPORT FOR
S PREAD AND N ON -S PREAD U SERS
• O PTIMIZED FOR U SE WITH THE
WGS S ATELLITE
– T UNEABLE OVER 1.2 GH Z
– 500 MH Z I NSTANTANEOUS
BANDWIDTH

– M ULTI -B AND /M ULTI -B EAM
O PERATION
– M ULTI - BEAM FAN I N /FAN O UT
C APABILITIES
– G AIN S TATES FOR O PTIMAL
A SSIGNMENT OF D ISADVANTAGED
T ERMINALS

Ruggedized MPM-1000 IP Modem
Network Capabilities

Optimized for Use with the WGS Satellite
• Multi-Band/Multi-Beam Operation Allows for Ka-Band and
X-Band Terminals in Different Satellite Footprints to Operate
in the Same Network

• Full Mesh, Hub-Spoke, and Hybrid Topologies Supported
• Burst-to-Burst Dynamic Control of Power, Spread Factors,
Data Rates, Channel Rates, Modulation and Code Rates

• WGS Gain States Allows for Optimal Assignment of
Disadvantaged Terminals to Highest Gain State Segments

Excellent Support for On The Move (OTM)
• Dynamic Spreading on a Burst-by-Burst Basis to Control Power
Spectral Density
• Rapid Acquisition/Reacquisition

• Multi-Beam Fan-In and Fan-Out Channelization Allowing
Control of a Network from a Single NC Along with Efficient
Dissemination of Multi-Cast and Broadcast Traffic
• Full WGS RF Coverage, 1.2 GHz IF with an Instantaneous
500 MHz Bandwidth

• Support of Doppler, Doppler-Rate, and Doppler Acceleration
Requirements

• Non-Contiguous Bandwidth Segments can be Assigned
Within One Transponder or Across Multiple Transponders

• Link-Layer Assured Delivery (ARQ)

Ruggedized MPM-1000 IP Modem Technical Specifications
MF-TDMA Network Centric Waveform

Mechanical/Electrical

Data Rate:

32 kbps – 4.096 Mbps (Per Carrier)

Turbo Coding:

SCCC – Rates 1/2, 2/3 and 3/4

Interleaver Block Length: 640, 1280, 2560, and 5120
Modulation Formats:

BPSK (Rate1/2 Coding)
OQPSK (Rate1/2, 2/3 and 3/4
Coding) 8 PSK (Rate 2/3
Coding)

Direct Sequence Spreading Gain:
0 to 12 dB (Spread Factor 1, 2, 4, 6,
8,12,16; up to 8.192 Mcps)
Number of Carriers (MF-TDMA Operation):
2 Tx
4 Rx
Encryption:

Size:

1U 19˝ Rack Mountable Chassis
19˝ Wide x 1.75˝ High x 18.5˝ Deep
Weight:
19 lbs (excluding mounting slides)
Input Power:
90 VAC to 264 VAC, 47-63 Hz or
+24 VDC Vehicle Power (Optional)
Power Consumption:
< 170 Watts
Frequency Reference: Internal or External (5 or 10 MHz)
Intermediate Frequency: Tx L-Band (950-2150 MHz) w/10 MHz
Reference and Externally Supplied
+18 to +48 VDC @ 3.0 Amps
Rx L-Band (950-2150 MHz) w/10 MHz
Reference and +18 VDC @ 450 mA

Baseband Interfaces
Monitor/Control:

AES-256 CBC TRANSEC
FIPS 140-2 Level 2 Certified

Control:

SNMP V3/L-3 Linkabit HCI

Environmental
Conduction Cooled and Environmentally Sealed
Non-Operating Temp:

-40˚C to +71˚C

Operating Temp:

0˚C to +50˚C

Vibration/Shock:

MIL-STD-810F

EMI:

MIL-STD-461

NCW Data Port:
FDMA Data Port:

10/100/1000 Base-T
(NCW and FDMA Control)
RS-485 (FDMA Control)
10/100/1000 Base-T
MIL-STD-188-114/RS-422/RS-423

MIL-STD-188-165A (FDMA) Compliant
Type I:

BPSK - 64 kbps to 6000 kbps
QPSK/OQPSK - 64 kbps to 8472 kbps
Convolutional Coding, RS Coding
and Data Scrambling (IAW IESS308, 309, 310 and OM-73)

Note: All specifications subject to change without notice

C l e a r e d b y D o D / O S R f o r p u b l i c r e l e a s e u n d e r O S R C a s e N u m b e r 1 1 - S - 0 6 7 8 o n January 4, 2011.

LINKABIT DIVISION
3 0 3 3 S C I E N C E PA R K R O A D , S A N D I E G O , C A 9 2 1 2 1
( 8 5 8 ) 5 5 2 - 9 5 5 5 FA X ( 8 5 8 ) 5 5 2 - 9 6 6 8 W W W. L - 3 C O M . C O M
Product Ser vice Help Desk: 1-800-331-9401
e-mail: [email protected]
1078068000

Document Path: ["brochure601.pdf"]

e-Highlighter

Click to send permalink to address bar, or right-click to copy permalink.

Un-highlight all Un-highlight selectionu Highlight selectionh