Name: LGS-301, LGS-304, LGS-303, LAG-103, LGS-402, LGS-403, LGS-404, LVP-2o, LVP-2t, LVP-2s, LGS-221,LGS-505,LGS-501,LGS-513,LGS-504,LGS-507,LGS-506,LGS-508, LGS-701, LGS-720, LUM-701,LGS-718, LFS-10-1F, LFS-40-1F, LFS-100-3F

Text: LABORATORY PPS
BUSINESS ESPIONAGE COUNTERACTION

SERVICES

L

oviding service in the field of information protection is our priority at Laboratory PPS.

Athorizing documents and permits held by our company, a wide variety of technical recourses and the broad experience of our staff allow
us to perform quality work in the following areas:
Testing, examination and certification of a variety of facilities and
information protection systems with full compliance to the norms
and requirements existing in this field in Russia.
Complex examination of premises to reveal possible and potentially dangerous technical channels for information leak, development
of recommendations for blocking such channels, issuance of a list
of advisable measures and protection equipment.
Individual consultations on miscellaneous issues of security and the use
of protection equipment.
Other services are also available.

SERVICES
.. .

'-"-'--.c--.c'

- ..

La priorit.4 du laboratoire PPS est d'assurer le service dans le domaine de la protection de I'information. Des documents d'avtorisotion et des permis detenuspar notre
soci6t.4, une grande variPt.4de recours techniques et une vaste expPrience de notre
personnel nous permettent de rPoliser un travail de qualit.4 dans les domaines suivants:
Essais, examen et certificationde nombreux .4quippments et systPmes de protection de /'information avec /a conformite! totaie aux normes et exigences exisfant
dons te domaine en Russie
Examen complexe des locaux afin de r6v6ler des chafnes techniques existantes
susceptibles #etre utilisees comme source de fuite de /7nformation, IElaboration
des recommandationspour bloquer ces voies, Y.4iaborationd'une liste des mesures
conseillPes et des Pquipments de protection.
Des consultations individu~llessur de diverses questions de skurit.4 et /'utilisation
des .4quipements de protection.
D'autres services sont ggalement dispronibles.

COMPANY
~boratoryPPS is the short name for the Business EspionageCounIteraction Laboratory, a joint stock company from St. Petersburg,
Russia. The company was established in 1992 and over the years has
earned authority and a good name. It has become one of the Leading
companies in Russia in the field of information security. Laboratory PPS's
priority is service in the field of information security and Technical Surveillance Countermeasures (TSCM).We also develop and produce
equipment for TSCM, in addition to marketingequipment made by other Russian and foreign firms. To sell service and equipment isn't our main
concern, rather we strive to find a common language with our clients
and to understand their problems. Based on this understanding, we help
our clients to create the optimum system of information security for their
d
companies and organizations.

Le laboratoire PPS est un nom courtpour le Laboratoirede Contre-actiona I'Espionnage Industriel, une societe anonyme de Saint-Petersbourg, en Russie. La societe
a et6 fondee en 1992 et au fil des ans a gagne son autorite et son bon nom. Elle est
devenue I'une des societes leader en Russie duns le domaine de la securite de finformation. La priorite du laboratoire PPS est d'assurer le service duns le domaine de la
securite informatique et des contre-mesures de surveillance technique (TSCM). Nous
developpons et fabriquons egalement des Pquipementspour TSCM,en plus de I'Pquipement de marketing realisepar d'autres entreprises russes et etrangeres.Notreprincipale preoccupation n'est pas celle de vendre des services et I'equipement, mais de
trouverplut6t un langage commun avec nos clients et de comprendre leurs besoins.
C'est a base de cette comprehension que nous aidons nos clients a creer le systeme
optimal de securite de ITnformationpour leurs entreprises et organisations.

Laboratory PPS offers its clients the best Russian and foreign TSCM
equipment. Likewise, we do our best to offer only equipment
VL, ,,Lhhas been field tested by our experts and which has shown itself
to perform well.
At the same time our company invests considerable funds in it's own
research and development. Our production facilities allow us to offer for
sale products designed and built by our own team of experts.
Of particular interest among the products designed by Laboratory PPS are:
Cellular Jammers.
TEMPEST protective systems.
Vibroacoustic and acoustic noise systems.
Pnti-interference supply line filters.

Le laboratoire PPS offre b ses clients les meilleurs equipements TSCM russes et etrangers. De mCme, nous faisons de notre mieuxpour ne proposer que le materiel qui avait
ete teste sur le terrain par nos experts et qui a montre de bonnes performances.
En mCme temps, notre entreprise investit des sommes considerablesduns la recherche
et le developpement. Nos installations de production nous permettent de vendre des
produits conqus et fabriques par notre propre equipe d'experts.
Parmi les produits conqus par le laboratoire PPS I'interCt particulier presentent:
Brouilleurs de telephones portables.
m Systemes de protection TEMPEST:
m Systemes de bruit vibroacoustiques et acoustiques.

Filtres de conduite antiparasites.

PRODUCT CATALOGUE
Contents
220/380V Power grids protection

LFS-10-1F/ LFS-40-1F/LFS-100-3F Pnti-interference supply-line filters . . . . . . . . . . 5
Vibroacoustic and acoustic noise Interference

LGS-301 Acoustic noise generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
LGS-304 Acoustic noise generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.
LGS-303 Portable acoustic noise generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
LAG-103 Acoustic safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
LGS-402 Vibroacoustic noise generators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
LGS-403 Vibroacoustic noise generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
LGS-404 Vibroacoustic and acoustic interference system . . . . . . . . . . . . . . . . . . . . . .9
LVP-20, LVP-2t, LVP-2s Vibration transducers for walls, windows
and pipes and acoustic radiator LVP-2a

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.

TEMPEST protective systems

LGS-221 Power line and ground system noise generator . . . . . . . . . . . . . . . . . . . . .
LGS-505 Protective system against compromising emanations . . . . . . . . . . . . . . . . .
LGS-501 Noise generator for protection against TEMPEST . . . . . . . . . . . . . . . . . . .
LGS-5 13 Protective system against compromising emanations. . . . . . . . . . . . . . . . .
LGS-504 Hardware and software complex for protection against TEMPEST . . . . .
LGS-507 Hardware and software complex for protection against TEMPEST . . . . .
LGS-506 Noise generator for protection against TEMPEST . . . . . . . . . . . . . . . . . . .
LGS-508 Noise generator for protection against TEMPEST . . . . . . . . . . . . . . . . . . .
Cellular jarnrners

LGS-701 Cellular jammer . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 15
LUM-701 Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
.
LGS-720 Cellular detection and suppression system . . . . . . . . . . . . . . . . . . . . . . . . . 16
ccPautina 3, Information security management system . . . . . . . . . . . . . . . . . . . . . . 18
LGS-718 Cellular iammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
.

ANTI-INTERFERENCE SUPPLY-LINE FILTERS LFS- 1 0- 1 F/LFS-40- 1 F/LFS-100-3F
The LFS- 10-1F/LFS-40- 1F/LFS- 100-3F anti-interference
supply-line filter is designed to protect radio electronics and
computers from data leaks through power circuits with the voltage
of up to 220 V (LFS-10-1F/LFS-40-1F)/380 V (LFS-100-30, frequency 50 0.5 Hz and maximum operating current l 0 A/40 A
(LFS-10-1F/LFS-40-1 F)/100 A (LFS-100-3F), as well as from highfrequency interference in the frequency band 0.1 + 1,000 MHz.

+

The product provides electromagnetic decoupling for power circuits of radio electronics and computers, as well as for industrial
and other electric grids.

Le produit LFS- 1O- 1F/LFS-40- 1F/LFS- 100-3F est c o n p pour proteger les
appareils electroniques et le materiel informatique de la fuite d'informarron causee par I'interference exercee sur un des circuits monophases avec une
tension de 250 V (LFS- 1O- 1F/LFS-40- 1 F)/380 V (LFS- 100-3F), 50 Hz 0,5, avec un
courant maximum de 1OM40A (LFS-1O- 1 F/LFS-40- 1F)/ 100 A (LFS- 100-3F) et
avec un fil de prise de terre, ainsi que pour une suppression de I'interference
duns la gamme de frequences de O,1+ 1000 MHz.

*

Le produit est utilise pour I'isolation electromagnetiquesur les circuits des dispositifs radioelectroniques, des Pquipements informatiques et des reseaux electriques des installations industrielles et autres.

Technical characteristics

Features

I

Maximum operating current

Value

10A

Insertion attenuation by voltage
in the frequency band 0.1 + 1,000 M H z

lOOA

40A
I

I

At least 6 0 dB
I

Operating voltage

At least 8 0 dB
I

220 V

380 V

Insulation resistance between the currentcarrying wires under standard climatic
conditions

At least 2 0 0 MOhm

Voltage drop at 5 0 Hz with the maximum
operating current 1 0 A/40A/100A

N o more than 1 V

Electrical resistance between the ground
clamp and the Product's case

N o more than 0.1 Ohm
I

+5 i +40

Operating temperature range

Weight

I

N o more
than 3.5 kg

N o more
than 5 kg

O C

N o more than
2 5 kg

ACOUSTIC NOISE GENERATOR LOS-301

LGS-301 is designed to protect voice data against interception
through the direct vibroacoustic and optico-acousticchannels.
LGS-301 is mounted at the windows and in the doorways, air ducts
and ventilation ducts.

l

Le produit LGS-30 7 est conqu pour proteger les donnees vocales de I'interception via le canal acoustique direct, vibro-acoustique et acoustooptique.

I1 est recommande d'installer I'Appareil a proximite des lieux possibles d'interception. Duns la pratique, le produit est installe dans les ouvertures de portes et
de fenCtres, dans les conduits de ventilation et dans des gaines d'air pres des
equipements techniques.

ACOUSTIC NOISE GENERATOR LGS-304

Voice frequency band at 5 5 dB

1 8 0 + 11,300 Hz

Integral sound pressure level of the acoustic noise signal
in the frequency band 2 0 + 12,500 Hz

At leost 9 4 dB

Output voltage adiustment range

At least 4 0 dB

Power consumption

N o more than 1 0 W

Power supply

- 2 2 0 V, 5 0 Hz

LGS-304 is designed to protect voice data against interception
through the direct vibroacoustic and optico-acoustic channels.
LGS-304 is mounted at the windows and in the doorways, air ducts
and ventilation ducts.

produit LGS-304 est conqu pourproteger les donnees vocales de I'interception via le canal acoustique direct, vibro-acoustique et acoustooptique.
I1 est recommande d'installer INppareil a proximite des lieux possibles d'interception. Duns la pratique, leproduit est installe dans les ouvertures deportes et
de fenCtres, dans les conduits de ventilation et dans des gaines d'air pres des
equipements techniques.

Technical characteristics
Features

Value

Voice frequency band at 5 5 dB

9 0 + 11,200 Hz

Output voltage adjustment range

At least 1 0 dB

Power consumption

N o more than 1 0 W

Power supply

PORTABLE ACOUSTIC NOISE GENERATOR LGS-303
LGS-303 is designed to protect voice data against interception
through the direct vibroacoustic and optico-acousticchannels.
The LGS-303 product is a mobile device. It is used inside premises (cars) and other places which do not require stationary means
of information protection throuqh direct acoustic channel and are
not equipped with stationary power supply.
The product can operate during up to 5 hours in continuous operation mode at ambient temperature +l"C to +40 "C and relative
humidity not exceeding 80 % (at +25 "C). The product uses three
AAA-size batteries.
Features

Le produit LGS-303 est conqu pour proteger les donnees vocales de I'interception via le canal acoustique direct, vibro-acoustiqueet acousto-optique.
Le produit LGS-303 est mobile et est conqu pour fonctionner a I'interieur,(dans
les vehicules)et duns d'autres lieux qui n'ontpas besoin de dispositif fixe de protection de I'information via le canal acoustique direct et non PquipPs de sources
electriques fixes.

Value

voice frequency band

1 8 0 + 11,300Hz

Power

3 batteries AAA

Work duration with batteries

5 hours continuously

Dimensions

41~111~17mm

Weight

0,2 kg

ACOUSTIC SAFE LAG- 103
The LAG-103 acoustic safe is used for protecting acoustic
information circulating near a cellular phone and information leakage through unauthorized phone switching to transmission mode (police mode) and recording.

n

Le coffre-fort acoustique LAG- 103 est conqu pour proteger I'information
acoustique circulant a proximite des tPlephones cellulaires, des fuites via
la commutation non autorisee d'un telephone visant a envoyer (frequencepoliciere) et a enregistrer I'information.

It is compatible with most smartphones produced by Samsung,
HTC, Apple, Nokia, Sony, LG, Blackberry.
Easy for transportation.
Sealed casing decreases noise readability.
Noise generation is initiated automatically when the casing with
a phone is closed.
Easy access to batteries.
The purpose of the acoustic safe is to block the audio access of a
GSM smartphone to the conversations in its physical environment.
The acoustic safe blocks the GSM microphone by creatinq white
noise. When a conversation begins the GSM devices have to be
placed at the acoustic safe, the white noise generator to be
switched on and to close the safe cover. In that way the GSM
phones don't have audio access to the conversation and it is not
possible to record it on the GSM dictaphone or to be intentionally
relaying or as a result of a spy software.

.i

Technical characteristics
Features

Value

Working frequency band

1 8 0 + 11,300Hz

Work duration with batteries

2 0 hours continuously

Dimensions

115x70~180
mm

'nnerSize

78xl5x140mm

Weight

0,8 kg

Power

3 W ( 2 batteries AAA)

VIBROACOUSTIC NOISE GENERATORS LGS-402/LGS-403

R

;S-402/LGS-403 enables protection through generating
broadband vibroacoustic noise interference on the room's
wa~lings.Vibroacoustic noise interference is created by the generator and transmitted to the structures through the vibration transducers. The product also supports installation of an acoustic radiator for protection of closed air spaces (air ducts, wells, etc.).
LGS-402/LGS-403 is a two-channel/one channel noise generator.
The impedance of electromagnetic vibration transducers constitutes 8 Ohm. Each channel supports parallel or sequential connection
of up to 4 electromagnetic vibration transducers and of an acoustic
radiator in such a way, that the overall load impedance would
reach 8 *2 Ohm. One generator enables connection of up to 8 vibration transducers.

l

LGS-402/LGS-403 fournit une protection en plaqant les interferences
vibro-acoustiques a large bande sur les zones potentiellement dangereuses des locaux. Les interferences vibro-acoustiquessont creees par un generateur et transmises sur les structures des constructionspar le biais des capteurs
de vibrations. I1 prevoit egalement la possibilite d'installer un Pmetteur acoustique pour proteger les volumes d'air fermQ (conduits d'air, gaines de ventilation, etc.).
LGS402/LGS-403 est un generateur de bruit a deux canaux/canalunique. La valeur
de la resistance des capteurs de vibrations electromagnetiques est de 8 ohms.
Sont permis des connexions parallele et successive de 4 convertisseurs vibreurs
Plectromagnetiques a chaque canal et d'un Pmetteur acoustique de telle sorte
que la resistance dechargesoit de 8 2 ohms. La quantite maximale des convertisseurs de vibration relies au generateur est de 8 pcs.

+

Technical characteristics
Value
Features

Number of outputs for terminal connection
Number of vibration transducers connected
to each generator output
Frequency band at the

spectral density irregularity of *3

Voltage adjustment range for each output
Entropic noise quality index at oscillator output
Power consumption
Power supply

LGS-402

LGS-403

2

1
Up to 4

dB

180 + 5,600 Hz
At least 40 dB
At least 0.6
20 VA at most
-220 V, 5 0 Hz

VIBROACOUSTIC and ACOUSTIC INTERFERENCE SYSTEM LGS-404
LGS-404 is designed to counteract special unauthorized data
retrieval devices that use the room's walling as leak channels.
The device protects against electronic and acoustic stethoscopes,
wired and wireless microphones, as well as laser and microwave data
retrieval systems. The product supports connection of an acoustic
radiator for protection of air ducts, air wells, door and window
openings.

Le systeme de la mise en place du brouillage vibro-acoustique et acoustique, LGS-404, est c o n y pour contrer les moyens speciaux de I'interception non autorisee des informations qui utilisent les enveloppes d'un bdtiment
en tant que canaux de fuite. Avant tout ce sont des stethoscopes electroniques
ou acoustiques destines a IFcoute a travers les plafonds, les planchers et les
murs, des microphones avec ou sans fil montes sur des enveloppes des bdtiments ou sur des conduites d'eau et des tuyaux de chauffage, ainsi que des systemes d'interception des informations a laser ou a micro-ondes a travers les
ouvertures de fenCtres.
Le produit assure une protection en plaqant les interferences vibro-acoustiques
a large bande sur les zones poten tiellement dangereusesdes locaux. I1prevoit la
possibilite d'installer un Pmetteur acoustique pour proteger des conduits d'air et
des gaines de ventilation.

Technical characteristics
Features

Value

Number of outputs for terminal connection

2

Number of vibration transducers connected
to each generator output

Up to 32

,

Frequency band at the spectral density
irregularity of 23 dB

90

Voltage adjustment range for each output

At least 1 0 dB

Entropic noise quality index at oscillator output

At least 0.8

+

Hz

Power consumption

15 VA at most

Power supply

- 2 2 0 V, 5 0 Hz

VIBRATION TRANSDUCERS for WALLS, WINDOWS and PIPES LVP-20, LVP-2t, LVP-2s
and ACOUSTIC RADIATOR LVP-2a
LVP-2s vibration transducer is designed to generate vibrations
in various structural components (walls, ceilings, floors) enclosing the allocated room.
LVP-2t vibration transducer is designed to generate vibrations in windows' glass and utilities (piping) that go beyond the allocated room.
LVP-20 is designed to generate vibrations in the glass of the windows enclosing the allocated room.
LVP-2a is designed to generate vibrations in window and door openings, air channels and air ducts, close to the utilities.

n

Le convertisseur de vibrations LVP-2c est destine a provoquer les vibrations dans les differents elements des constructions (murs, plafonds,
planchers) en isolant I'espace en question.
Le convertisseur de vibrations LVP-2t est destine a provoquer les vibrations sur
les unites en verre des fenhres et des services d'ingenierie (tuyau de communication) en dehors de I'espace protegC
Le convertisseur de vibrations LVP-20 est conqu pour provoquer les vibrations
sur les unites en verre des fenCtres protegeant I'espace en question.
L'emetteur acoustique LVP-2a est destine a provoquer des bruits acoustiques
masquants duns de divers espaces clos (tels que des ouvertures des portes, des
conduits d'air, etc.).

characteristics
Features

Value

Dimensions

N o more than 4 0 x 2 5 mm

-

NOmore than 0.1 2 kg

POWER LINE and GROUND SYSTEM NOISE GENERATOR LGS-221
LGS-221 is used to actively protect the informatization equipment against data leaks through the power grid and ground
system. The Product provides protection against data leaks through
the 220 V single-phase three-wire power grid with the frequency
50 Hz (phase, neutral and ground) by generating broadband noise
interference in all the conductors.
The Product 1s an analogous generator loaded on antennas that
are located In the device's power cord.
LGS-22 1 est un moyen technique de protection de I'information c o n p pour
une protection active des objets d'informatisation des fuites d'information
sur un secteur d'alimentation et de mise a terre. Le produit offre une protection
contre les fuites d'information par un reseau monophase a tro 1Ois fils d'alimentation 220 V 50 Hz en mettan t en place une interference de bruit a large bande dans
tous les conducteurs de masquage sonore et les circuits d'alimentation electrique
et de mise a terre dans la gamme de frequences de 0,O 1 a 7800 MHz.
Le produit est un generateur stochastique analogiquea moyennepuissanceinstalIe sur les antennes situes structurellementdans le bloc d'alimentation du produit.

PROTECTIVE SYSTEM AGAINST COMPROMISING EMANATIONS LGS-505
LGS-505 is an integrated data security device designed to
actively protect informatization equipment against data leaks
through power grids (phase, neutral and ground) and to counteract
the unauthorized data retrieval devices that operate through TEMPEST
interferchannels, by generating broadband noise electromaqnetic
ence in the frequency band 0.01 + 1,000 MHz.
Le produit LGS-505 est congu pour une protection active des objets d'informatisation des fuites d'information sur un secteur d'alimentation 220 V
5o HZ phase)), cczerox et ccprise de terre de protection)))et pour lutter contre I'interception non autorisee des informations via les emissions compromettantes
en creant des interferenceselectromagnetiques a large bande dans une gamme
de frequences de 0,O 7 MHz a 1000 MHz.

Technical characteristics
Value

Features

Signal level at power cord plug

Generator output signal level

Entropic noise quality index at oscillator output
Power consumption
Power supply

LGS-221
Frequency band

Bandwidth

LGS-505
Signal Level

10+ 150KHz

200 Hz

0.15+ 30 MHz

9 KHz

At least 45 dBpV

At least 40 dBpV

30 + 300 MHz

120 KHz

At least 50 dBpV

At least 45 dBpV

0.01 + 0.15MHz

200 Hz

-

At least 50 dBpV

0.15+ 30 MHz

9 KHz

-

At least 50 dBpV

30 + 1,000MHz

120 KHz

At least 50 dBpV

At least 55 dBpV

1,000+ 1,800MHz

120 KHz

At least 50 dBpV

-

At least 40 dBpV

At least 0.8

At least 0.6

N o more than 40 W

55 W at most

-220 V, 50 Hz

NOISE GENERATOR for PROTECTION AGAINST TEMPEST LGS-50 1
LGS-501 is designed to counteract the unauthorized data
retrieval devices that operate through TEMPEST channels (compromising emanations) by generating broadband noise electromagnetic interference in the frequency band 0.01 1,800 MHz.

-

Le generateur de bruit LGS-50 1 fournit une protection contre les fuites d'information via les canaux TEMPEST (emissions electromagnetiques compromettantes et de surveillance) en creant une interference electromagnetique
du bruit a large bande duns la plage de frequences de 0,O 1 + 1800 MHz.

PROTECTIVE SYSTEM AGAINST COMPROMISING EMANATIONS LGS-5 13
LGS-5 13 is an integrated data security device designed to
actively protect informatization equipment against data leaks
through power grids (phase, neutral and ground) and to counteract
the unauthorized data retrieval devices that operate through TEMPEST
channels (compromising emanations), by generating broadband noise
electromagnetic interferencein the frequency band 0.01 + 2,000 MHz.
LGS-51 3 have a special module for connection computer equipment.
Le produit LGS-5 13 est c o n y pour une protection active des objets d'informatisation des fuites d'information sur un secteur d'alimentation 220 V
50 Hz (ccphase)),cdrou et ccprise de terre de protection)))et pour lutter contre I'interception non autorisee des informations via les emissions compromettantes
en creant des interferences electromagnetiques a large bande duns une gamme
de frequences de 0,01 + 2000 MHz.
LGS-513 possede un module special de connexion aux ordinateurs.

Technical characteristics
Value

Features

Signal level at power cord plug

Generator output signal level
at the load of 50 Ohm

Entropic noise quality index at oscillator output
Power consumption '
Power supply

LGS-5 1 3

LGS-501
Signal Level

Frequency b a n d

Bandwidth

1 0 - 150KHz

200 Hz

-

0.15 + 30MHz

9 KHz

-

30 + 300 MHz

120 KHz

-

0.01 + 0.1 5 MHz

200 Hz

At least 65 dBpV

0.15 + 30 MHz

9 KHz

At least 85 dBpV

30 + 1,000 MHz

120 KHz

At least 70 dBpV

1,000 + 1,800 MHz

120 KHz

At least 60 dBpV

1,800 + 2,000 MHz

120 KHz

-

At least 40 dBpV

At least 50 dBpV

At least 0.8
N o more than 40 W

55 W at most

-220 V, 50 Hz

PROTECTIVE SYSTEM AGAINST COMPROMISING EMANATIONS LGS-504 and LGS-507
System is designed to generate and radiate a broadband high-frequency signal
in the frequency band of up to 2 GHz and consists of two devices - LGS-504 and LGS-507.
The product is peculiar in that it enables gradual and stand-alone adjustment of the spectral radiation density in twelve frequency subbands.
This helps create the required form of the radiation spectrum, when installing based on the
existing operation.

-

Le systeme est concu pour generer et emettre un
signal de haute frequence a la large bande dans
une bande de frequence jusqu'h 2 GHz, et comprend
deux dispositifs - LGS-504 et LGS-507.

Le produit permet de rkgler d'une maniere graduelle et
autonome la densite spectral de I'emission dans douze
sous-bandes de frequence.
Lors de I'installation a la base d'un systeme existant
dPja, cela aide a obtenir la forme requise du spectre
d'emission.

Technical characteristics
Features

Value

Signal level at device output with the load of 50 Ohm,
frequency band 0.009 + 0.1 5 MHz, receiver bandwidth
f = 200 Hz

At least 65 dBpV (LGS-504LF)

Generator output signal level in the frequency band
0.15 + 3 0 MHz and receiver bandwidth f = 9 kHz

At least 65 dBvV (LGS-504LF)

Signal level at LGS-504 output with the load of 50 Ohm,
frequency band 30 + 1,000 MHz, receiver bandwidth
f = 12 0 kHz

At least 65 dBpV (LGS-504HF)

Signal level at LGS-507 output with the load of 5 0 Ohm,
frequency band l.0 + 2.0 GHz, receiver bandwidth
f = 12 0 kHz

At least 60 dBpV

Spectral components adjustment range in the average
frequency bands of Product branchingfilters
At least 30 dB
for LGS-504 (15, 75, 225, 375,525, 700, 900 MHz]
Spectral components adjustment range in the average
frequency bands of Product branching filters
for LGS-507 (1 .l,1.3, 1.S, 1.7, 1,9 GHz)

At least 30 dB

Maximum signal power applied to LGS504HF ontenna

0,25 W

Maximum signal power applied to LGS504LH antenno

0,07 W

Maximum signal power applied to LGS-507 antenna

0,15 W

Maximum number of Pautina modules conneded to PC

No more than 255

Operation mod

Round the clock

Mean time between failures

At least 10 000 h

Average durability

10 years

System consists of the following components:
LGS-504HF - is a broadband generator
(0.009+ 1,000 MHz) with a built-in antenna. The Product is made as a flat thin (up to
17 mm) radiating plate that can be concealed
behind a paintingon the wall. LGS-504enables
gradual and stand-alone adjustment of the
spectral radiation density in six frequency
sub-bands. The average frequencies of the
branchingfilters are as follows: 75, 225, 3 75,
525,700,900 MHz.
LGS-504LF - is a generator (0.009 + 30 Hz)
that enables gradual adjustment of the
spectral radiation density in one frequency
sub-band.
LGS-507 - is a broadband generator
(1.0 a 2.0 GHz) with a built-in antenna. The
average frequencies of the branching filters
are as follows: 1.1, 1.3, 1.5, 1.7, 1.9 GHz.
Power supply unit.
a Pautina - hardware and software complex,
which is a remote control device used to manage the operation modes of high-frequency
generators.

HADWARE AND SOFTWARE COMPLEX PAUTINA
Pautina complex consists of LUK module that is a unit
with a remote cable plug of DVI-Dtype.The unit housing is
equipped with an R.-45 socket for connecting to Ethernet
network. LUK module is powered through a DV1 plug.
Operation modes data of LGS-504LF, LGS-504HF and
LGS-507 is received and transmitted via R. 45 connector.
Several LUK modules are connected to single PC with an
Ethernet switch (maximum number of connected modules: not more than 255 to the same subnet).

free HDD space at least 500 MB.
RAM 51 2 MB or higher;
Ethernet controller 10/100 Mbps;
Pautina complex that is a component of protective system
against compromising emanations LGS-504 and LGS-507
performs the following operations:
Power on/off of noise generators that are components of protective system against compromising emanations;
Receiving and sending commands to digital potentiometers of noise generators that are part of protective system
against compromising emanations according to TCP/IP
protocol;
Noise generators communication outage monitoring that
are part of protective system against compromising emanations.

LUK module is controlled via a PC with Pautina 1.0 software run under 32 and 64-bit versions of Microsoft
Windows ME/NT/2OOO/XP/2003/2008/Vista/7/8.
Pautina 1.0 software is designed to operate on IBMcompatible PCs meeting the following requirements:
CPU 1 GHz (if number of simultaneously controlled noise
generators is more than 50, it is recommended to use
at least 2 GHz CPU);

I

Change of radiation spectrum LGS-504

Change of radiation spectrum LGS-507

I

NOISE GENERATOR for PROTECTION AGAINST TEMPEST LGS-506
LGS-506 is an average analogous stochastic oscillator
loaded on the antenna that is located in the device's case. It
15 uesigned to generate and radiate a broadband high-frequency
signal in the frequency band of up to 1 GHz.
LGS-506 is peculiar in that it enables gradual and stand-alone
adjustment of the spectral radiation density in six frequency subbands. This helps create the required form of the radiation spectrum, when installing based on the existing operation conditions.

n

LGS-506 est un generateur stochastiqueanalogique a moyenne puissance installe sur I'antenne se trouvant duns le boitier du produit et a pour
7 generation et I'emission d'un signal de haute frequence a large bande
duns une gamme de frequences allantjusqu'a 7 GHz.

La particularite du produit LGS-506 est la possibilite d'un contrble souple et
independant du niveau de la densite spectrale de I'emission duns les six sousbandes de frequences. Ceci permet d'obtenir une forme desiree du spectre
d'emission en fonction des conditions requises de fonctionnement.

NOISE GENERATOR for PROTECTION AGAINST TEMPEST LGS-508
LGS-508 is designed to generate and radiate a broadband
high-frequency signal in the frequency band 1 .O + 2.0 GHz.
LGS-508 is peculiar in that it enables gradual and stand-alone
adjustment of the spectral radiation density in five frequency subbands. This helps create the required form of the radiation spectrum,
when installing based on the existing operation conditions.
LGS 508 est un generateur stochastique analogique a moyenne puissance installe sur I'antenne se trouvant duns le boitier du produit et a pour
but la generation et I'emission d'un signal de haute frequence a large bande
duns une gamme de frequences de 1.0 GHz a 2.0 GHz. La particularite du produit LGS-508 est la possibilite d'un contrble souple et independant du niveau de
la densite spectrale de I'emission duns les cinq sous-bandes de frequences. Ceci
permet d'obtenir une forme desiree du spectre d'emission en fonction des conditions requises de fonctionnement.

Technical characteristics
Features

Value

Signal level at LGS-506 output with the load of 5 0 Ohm, frequency band 0.009 + 0.15 MHz, receiver bandwidth f = 2 0 0 Hz

At least 4 0 d8pV

LGS-506 output signal level In the frequency b a n d 0.1 5 i 3 0 M H z and receiver bandwidth f = 9 k H z

At least 5 0 d8pV

Signal level at LGS-506 output with the load of 5 0 Ohm, frequency band 3 0 + 1,000 MHz, receiver bandwidth f = 120 kHz

At least 6 0 dBpV

Signal level at LGS-508 output with the load of 5 0 Ohm, frequency band 1.0 + 2.0 GHz, receiver bandwidth f = 120 kHz

At least 6 0 dBpV

Spectral components adjustment range in the average frequency bands of LGS-506 branching filters (75, 225, 375, 525, 700, 900 MHz)

At least 3 0 dB

Spectral components adjustment range in the average frequency bands of LGS-508 branching filters (1.l,1.3, 1.5, 1.7, 1.9 GHz)

At least 3 0 dB

Maximum signal power applied to LGS-506 antenna, W

0,25

Maximum signal power applied to LGS-508 antenna, W

0,15

O ~ e r a t i o nmod

Round the clock

Mean time between failures

At least 1 0 0 0 0 h

Average durability

1 0 years

CELLULAR JAMMER LGS-70 1
LGS-701 mobile communication blocking device is designed ta
block (suppress) communication between the base stations and
iobile phones operating in the following standards: IMT-MC-450
(NMT-450i), GSM 900, E-GSM 900, DSC/GSM 1800, DECT 1800,
AMPS/N-AMPS/D-AMPS-800, CDMA-800, CDMA-2000 1.
The product is also suitable for blocking unauthorized cell-phonebased tapping devices working in any of the abovementioned standards.
Le broyeur de signal tPlephonique LGS-707 est conqu pour bloquer (neutraliser) la connexion entre les stations de base et les telephonesmobiles du
reseau telephonique fonctionnant dans les standards: IMT-MC-450 (NMT-450i),
GSM 900, E-GSM 900, DSC/GSM 1800, DECT 7800, AMPS/N-AMPS/D-AMPS-800,
CDMA-800, CDMA-2000 1.
Le produit peut etre utilise pour bloquer le fonctionnement des dispositifs
dYcoute non autorisee faits a base des telephones cellulaires de tous les standards mentionnb ci-dessus.

AMPLIFIER LUM-70 1

B

This product is designed for amplification of output power
on the terminals of a cellular service blocker, which results in
increasing the operation range of the LGS-701 blocker. The product is connected to the antenna terminal of the LGS-701 cellular
service blocker. The amplification is carried out channel by channel
on every terminal. The product amplifies power for IMT MC-450,
GSM900, DSC/GSM 1800 standards.

Ce produit est concu pour augmenter la puissance de sortie sur les sorties
du bloqueur d'ondes cellulaires ce qui permet d'elargir le rayon d'action
uu urspositif LGS-701. Leproduit se connecte auxsorties de I'antenne du broyeur
d'ondes cellulaires LGS-70 7. L'augmentation se produit canal par canal a chaque
sortie. Le produit augmentela puissancepour les standards IMT-MC-450, GSM900,
DSVGSM 7 800.

Technical characteristics
Features

Value

Working frequency band:

- IMT-MC-450(CDMA2000 1X) standard

At least 462.5 + 467.475 MHz

- GSM900 standard

At least 925 + 960 MHz

- DSC/GSM1800, (DECT1800) standard

At least 1,805 + 1,900 MHz

Maximum output on the antenna iack:

- IMT-MC-450(CDMA2000 1X) standard

33 dBm (2 W )

- GSM900 standard

33 dBm (2 W )

- AMPS/DAMPS800(MSK version) standard

33 dBm (2 W )

-

DSC/GSM 1800 standard

30 dBm (1 W )

Output adjustment range on the antenna jack

At least 13 dB (20 times) per output, gradually and separately

Maximum LUM-70 1 out~ut

35 W

-

CELLULAR DETECTION AND SUPPRESSION SYSTEM Lrm
1720

I
I

The LGS-720 system serves for detection, identification and suppression of radio transmitters that use
digital data communication message protocols, including:
cellular phones and modems of CDMA450, GSM 900,
1800 and 3G standards;
wireless data transmission devices (WLAN, Bluetooth
and WiMax);
DECT phones;
The system components are:
System control and adjustment unit.
Remote unit.
Suppression unit.
The control unit serves for estimation of radio environment
in the area of installation and adjustment of remote units,
and efficiency assessment of the deployed system.
The remote unit provides detection and identification of
radio transmitting devices and transmission of information to the suppression unit.
The suppression unit serves for blocking (suppressing)
communication between base stations and mobile cellular phones/wireless data transmission devices.
The required number of remote units and the composition of the suppression unit depend on the results of the
control unit operation, controlled area and the level of
base station signal in the place of installation.
The number of remote units can be increased whenever
required during operation.
Data transmission is carried out via IR channel.

systeme LGS-720 est congu pour detecter, identifier et supprimer des dispositifs de radio utilisant des protocoles numeriques de transmission des donnees. 11s comprennent:
telephones cellulaires et modems des standards CDMA450,
GSM 900, 1800 et 3G;
dispositifs sans fil de transmission des donnees WLAN, Bluetooth
et WiMax;
telephones cellulaires mini (DECT).
Le systeme comprend:
bloc de commande et parametres du systeme;
module distant;
bloc de suppression.
Le bloc de commande est congu pour Pvaluer I'environnementradio
sur son lieu d'installation, configurer des modules distants et Pvaluer I'efficacite du systeme deploye.

Le module distant permet la detection, /'identification des emetteurs radio et le transfert de donnees au bloc de suppression.
Le bloc de suppression est destine a supprimer (bloquer) la communication entre les stations de base et les telephones portables
du reseau cellulaire et des dispositifs sans fil de transmission de
donnees.
Le nombre de modules distants necessaires et la composition du
bloc de suppression sont determines en fonction des resultats du
fonctionnement du bloc de commande et dependent de la surface
contr6Iee et de la force du signal des stations de base pres de I'endroit d'installation.
Lors du fonctionnement le nombre de modules distants peut rapidement augmenter.
La transmission de I'information s'effectue par le biais d'un port
infrarouge.

Technical characteristics
Features

Value

Remote unit:
Frequency ranges

4 3 0 + 4 6 5 MHz, 8 9 0 + 9 6 0 MHz, 171 0 + 1900 MHz,
1940 + 2 144 MHz, 2 4 0 0 + 2 6 0 0 M H z

Alarm level setting range

6 0 dB

Time of analyze:

- GSM 900, 1800 U 3 G

4 0 ms

- Bluetooth, WLAN and Bluetooth

150 ms

Suppression unit:
Frequency ranges/Maximum output on the antenna iack:

- IMT-MC-450 (CDMA2000 1X) standard

At least 462.5 + 467.475 MHz/33 dBm ( 2 W ]

- GSM900 standard

At least 935 + 9 6 0 MHz/33 dBm (2 W ]

DSC/GSM 1800, (DECTI 800) standard
- IMT-2000/UMTS (3G) standard

At least 1805 + 1900 MHz/30 dam ( l W )

N' 1

At least 201 0 + 2025 MHz/30 dBm ( l W )

N' 2

At least 2125 + 2 1 7 0 MHz/30 dBm ( l W )

- Bluetooth, WiFi standard
4 G (LTE, WiMAX)

At least 2 4 0 0 + 2483.5 MHz/20 dBm (0.5 W )
At least 2 5 6 0 + 2 7 0 0 MHz/30 dBm (1 W )

Output adjustment range on the antenna iack

At least 13 dB (20 times) per output, gradually and separately

Effective suppression radius

3 + 5 0 m depending on the power of the base station signal at the point
of installation and on the type of terminal devices used

Power consumed from a 2 2 0 V 5 0 Hz power line

N o more than 25 W

Application example in classroom

INFORMATION SECURITY MANAGEMENT SYSTEM ((PAUTINA 3))

r

You can use our information security management
,ystem ((Pautina 3)) to control various information
protection devices over a network. It gathers information
from the devices that are connected over a network to
the server that hosts our software and displays it in a
plain and friendly UI.

Operator module on a server and many instances of Control
module on various computers which are connected over
the network.
2 ) Hardware part, which can contains various of devices.

In basis, it can contains devices, provided by Laboratory PPS
such as - LGS-504, LGS-507, LUM-701 and LGS404.
Information security management system ((Pautina 3)) In combination with module LUK, devices with manual
control can be included in the set of supported devices.
consists of:

1 ) Software part, which is devided on control module
and operator module. Control module - is a set of services for collecting information about devices state and
controlling them. Operator module - to visualize collected information in a plain UI.

In the simplest case, the two modules are installed on one
computer. But the usual case, is to install one instance of
18

Vous pouvez utiliser notre systeme IogicieVmateriel c(Pautina3,
pour effectuer la gestion des differents systemes de protection de I'information duns le reseau. Le systeme recueille I'information provenant des appareils connectes au serveur hebergeant
notre logiciel et I'affiche a I'aide d'une interface utilisateur simple et
conviviale.

Le systeme ccpautina 3 comprend:

I ) Un logiciel compose des unites de contrdle et d'operateur.
L'unite de contrdle est un ensemble de services rassemblant
les donnees sur I'etat des appareils et leur gestion. L'unite
d'operateur est destinee a visualiser les informations collectees duns une simple interface utilisateur. Dans le cas le plus
simple, les deux unites sont installees sur le mCme ordinateur. Mais d'habitude, un exemplaire de I'unite d'operateur
est heberge par le serveur, et quelques copies de I'unite de
contrble sont installees sur de divers ordinateurs connectes
au reseau.
2) Un composant de materielsusceptiblede reunir quelques

dispositifs differents. Les appareils proposes par le laboratoire PPS, par exemple LGS-504, LGS-507, LUM-70 l u LGS-404
peuvent en servir de base. Le module LUKpermet d'integrer
les appareils a commande manuelle duns I'ensemble de dispositifs compatibles.

Advantages:

Remote device control throught the secure and unsecure protocol: Net/TCP, HTTP, HTTPS.
PLldible and visual warning of an unauthorized change
of mode of the device
Monitoring of the devices in different facilities
Limitation of the list of facilities for each user
Storing of complicated (randomized) passwords for
accessing to facilities on electronic keys EToken
Saving settings in non-volatile memory of devices
The possibility of extending the list of supported devices
by using the API
Different installers - for administration and public use.
Supporting complex feedbacks with devices, not only
turns on/off.

LGS-7 18 mobile communication blocking device is designed to block (suppress) commun~cationbetween the base stations and moblle phones operating in the following standards: IMT-MC-450, GSM900,
DSC/GSM 1800, IMT-2000/UMTS (3G).
(DECT1800), Bluetooth, WIR, 4G(LTE, WIMAX).

CELLULAR JAMMER LGS-718

Technical characteristics
Features

Value

Working frequency band:

- IMT-MC-450(CDMA2000 l x ) * standard

At least 462.5 + 467.475MHz

- GSM900* * standard

At least 935 + 960 MHz

- DSC/GSM 1 800, (DECT1800)standard

At least 1 805 + 1900 MHz

- IMT-2000/UMTS (3G) standard:

N? 1

At least 201 0 + 2025 MHz

N' 2

At least 2 125 + 21 70 MHz

- Bluetooth, WiFi standard

At least 2400 + 2483.5 MHz

- 4G (LTE, WiMAX)

At least 2560 + 2700 MHz

Maximum output on the antenna iack:

- IMT-MC-450(CDMA2000 l x ) standard
- GSM900 standard

33 dBm (2 W)

- DSC/GSM1800 standard

30 dBm (lW)

-

IMT-2000/UMTS (3G) standard

- Bluetooth, WiFi standard
- 4G (LTE, WiMAX)
Output adjustment range on the antenna iack

Effective suppression radius

LGS-718 is easy to install and operate, and
requires no special skills. The device is peculiar in
that it has five independent channels for power
adjustment per each frequency band. Thisfunction enables you to create blocked zones based
on your own requirements.
The M-version of LGS-718 blocks AMPS/
N-AMPS/D-AMPS-800/CDMA-800, IMT2000/UMTS (3G), Bluetooth and WiFi networks.

33 dBm (2 W)

30 dBm (1 W)
20 dBm (0.5 W )
30 dBm (lW ]
At least 13dB (20 times) per output,
araduallv and se~aratelv
3 + 50 m depending on the power
of the base station signal at the point
of installation and on the type
of terminal devices used.

Amplification factor of the antenna systems that
come in the s u ~ ~~ockaae
lv

About 0 dBi with a circular pattern

Power

Single-phased AC network, voltage:
85 + 264 V, frequency: 47 + 63 Hz

Power consumed from a 220V 50Hz power line

N o more than 25 W

Dimensions (no antenna):

N o more than 2 8 0 x 2 0 0 ~ 4 0mm

Weight

N o more than 1.8 kg without antennas

* Preferred is the sub-band A. Can be expanded or changed far any of sub-bands B-H.
* * The operating frequencies band far the G S M 9 0 0 standard can be expanded to the E-GSMPOO
standard (925 + 960MHzJ.

This device is a leader in the LGS series of blocking devices, as it combines all the functions
offered by LGS-701, LGS-712, LGS-713 and
LGS-704. LGS-7 18 would help you prevent
unauthorized data retrieval through the mobile
communication standards and would block
unauthorized cell-phone-basedtapping devices,
and the devices operating through the Bluetooth
and WiFi digital data exchange channels. The
product can be used to block mobile connection in locations, where complete silence is
a must. It comes in handy in conference halls,
negotiation rooms, museums, theaters, galleries, churches and university auditoriums.

Le broyeur de signal telephonique LGS-718 est
conqu pour bloquer (neutraliser) la connexion
entre les stations de base et les telephones mobiles de
reseau telephonique fonctionnant dans les standards:
IMT-MC-450, GSM 900, DSC/GSM1800, (DECT1800),
IMT-2000/UMTS (3G ), Bluetooth, WiFi, 4G(LTE, WiMAX).
Actuellement, le produit est le premier parmi les broyeurs de signal telephonique de la serie LGS qui combine
toutes les fonctionnalitesdes produits LGS-701, LGS-712,
LGS-713 et LGS-704.

Le produit vous epargnera des fuites non autorisees
d'information via les reseaux telephoniques et bloquera
le fonctionnement des dispositifs d'Pcoute bases sur un
telephone cellulaire, des canaux numeriques de transmission des donnees Bluetooth et WiFi.
Le broyeur bloque la communication cellulaire dans
des lieux ou le silence absolu est necessaire et peut Ctre
utilise dans des salles de conference, de reunion, duns
des musees, des theitres, des galeries, des eglises et des
salles de classe.

IS SOMETHING
BUGGING YOU?
Call us!

LABORATORY PPS
BUSINESS ESPIONAGE COUNTERACTION

1/64 Pereulok Grivtsovo,
St. Petersburg, 190000, Russia
+7 (812) 702-7383,595-4081
e-mail: [email protected], http://www.pps.ru

Document Path: ["1327-laboratory-pps-product-list-specifications.pdf"]

e-Highlighter

Click to send permalink to address bar, or right-click to copy permalink.

Un-highlight all Un-highlight selectionu Highlight selectionh